Orange Pi I96 #
Hardware Specification #
Feature | Description |
---|---|
CPU | RDA8810PL ARM Cortex-A5 32bit |
GPU | Vivante GC860 3D GPU |
Memory | Integrated 256MB LPDDR2 SDRAM |
Storage | TFcard/Integrated 500MB 8Bit 1.8V 4K SLC NandFlash |
Networking | Onboard WIFI+BT (RDA5991) |
Audio | No Video In/Output |
Video Outputs | No Video In/Output |
Camera | MIPI CSI-2 for up to 2 Megapixel |
USB | 1x USB 2.0 Host, 1xUSB OTG ( MicroUSB) |
RTC | No onboard RTC support |
Debug UART | 3pins Debug UART |
GPIO | 40 Pin 1.8V female GPIO connector |
Buttons/Header | Power Button/Boot Switch Header |
Power Source | Micro USB 5V@2A,Battery |
LED | Power led & Status led |
Dimension | 60mm*30mm |
Product’s Life Cycle #
Parameter | Status |
---|---|
Production status: | Not available |
Expected EOL: | SOC is EOL,Not recommended for new Designs |
Mainline Support: | Partial |
Supported Operating Systems: #
Support Matrix:
Project | Upstream Support | Downstream Support | Not Supported |
---|---|---|---|
Linux Kernel | Yes | Yes | |
U-Boot | No | Yes | |
Yocto | X | ||
Buildroot | x |
Defconfigs:
Linux defconfig: armv7_defconfig
Linux Decice Tree: rda8810pl-orangepi-i96.dts
U-Boot defconfig: rda8810_config